Yuku free message boards

Thanks Guys...

Here's the Process, 2 base coats using Choc at 6oz with a syringe, taped out boarder and pattern 1/2 tape for Tile 3/4 for boarders, 1 coat of Choc over tape (tack coat) then 1 coat of Palomino at 3oz over that, then final coat was 80% coverage dipping into bucket and spreading with trowel knocking down. Pulled tape when it was 90% dry  (still barley soft), cleaned it all up when it was 100% dry.

Mixed up 3 to 1 Ultrastone (1) .... water (3) with Choc 3oz ... 2oz Forest Green 3 to 1, separate sprayers... 3rd sprayer was water.

Sprayed water to surface, then sprayed choc, then sprayed forest green some places very light some heavier... swirled some areas in with broom and scrubbed some area's out a little so the palimino would also show through a little here and there... Let dry for 24hrs... next day came back cleaned and sealed.