

Tops: 3/4in plywood that had 1x3 boards screwed to the edge to keep epoxy from rolling off edge. Owner did this and had terrible gaps between top and side boards. Wood filled the edges then sanded the entire tops. Epoxy with Cab-o-sil and a touch of gunmetal to seal all the screw holes in the tops. Immediately after that coat applied UV-1 with gunmetal as base. Streaked Coffee and Charcoal (dripped off of plastic spoon). Rolled surface with texture roller. Sanded and applied urethane. Owner is edging with wood and doing some sort of rock face to the bar and fireplace. Will get finished pictures later.



